Flexible Clean Propulsion Technologies

NOx Emission Control of Exhaust Gases from Ammonia Engine with Vanadium and Iron SCR Catalysts

Author

Jaakko Petrelius

Category

Publication channel

Keywords

ammonia, Adsorption, iron, mass spectrometry, transient kinetic, vanadium, SCR

Year of the publication

2026

Citation

 

Petrelius, J. (2026). NOₓ emission control of exhaust gases from ammonia engine with vanadium and iron SCR catalysts [Master’s thesis, University of Oulu]. https://cleanpropulsion.org/wp-content/uploads/2026/11/Thesis_NOX-EMISSION-CONTROL-OF-EXHAUST-GASES-FROM-AMMONIA-ENGINE-WITH-VANADIUM-AND-IRON-SCR-CATALYSTS.pdf

Language

English

Related to:

Abstract

Tightening CO2 legislations in the automotive and marine industry has sparked major discussions regarding alternative, carbon free fuels such as ammonia. Though ammonia is carbon free, a high amount of nitrogen oxides (NOx) is released in combustion. The selective catalytic reduction by ammonia (NH3-SCR) has been applied world-wide to decrease NOx emissions.

It is important to investigate the ammonia adsorption-desorption phenomena on the SCR catalysts, to understand better the NH3-SCR reactions. Using transient kinetic methods together with mass spectrometry, it is possible to detect and interpret adsorption and desorption rates and capacities.

Experiments were conducted at the Heterogenous catalysis laboratory at the Chemistry Department of the University of Cyprus. In this Master’s thesis, extruded and coated vanadium (V) SCR and iron (Fe) SCR catalysts were investigated by transient kinetic methods under various conditions. The effect of water, N2O and oxygen was investigated on SCR and platinum catalysts by NH3 adsorption-desorption experiments at 150-400 ºC. The presence of water (5%) increased NH3 adsorption on V-SCR but decreased on the Fe-SCR catalyst. 50 ppm N2O present in reaction conditions decreased clearly NH3 adsorption on the Fe-SCR but had a negligible effect on the V-SCR catalyst. These transient results showed the differences between NH3-SCR catalysts in exhaust conditions and were applied to evaluate the existing theories for NH3 adsorption.